News & Specials

How to Tie Up to a Mooring Ball

How to Tie Up to a Mooring Ball

There may come a time during your boating career where you need to tie your boat up to a mooring ball.  It may be when you plan to spend the night in an anchorage called a "mooring field" where mooring balls are used to space the boats so they won't swing into one another. 

So what exaclty is a mooring ball? 

A mooring ball is a place to safely secure your boat for a few hours or the night. A mooring ball floats on the surface and is connected to a large, heavy anchor permanetly attached to a seabed or lake bottom. A length of line called a pennant - usually with a loop at the end - is attached to the mooring ball.

Some mooring balls also have a 'pickup stick' that helps you to grab the line when you are on a larger vessel with a high bow.  According to Captain Scott Savo, Freedom Boat Club trainer manager in Southeast Florida the secret to tying up to a mooring ball is to approach it at very slow speed. Angle your approach so the bow of the boat is into the wind.  This will help you maintain control. Position a crew member on the bow with a boathook and a dockline. When your boat reaches the mooring ball, the crew member should grab the pickup stick, if there is one, or use the boathook to snag the floating line by the loop. If your boat only has one cleat at the bow, ask your crew to fasten one end of dockline to the cleat, pass the other end through the loop of the mooring-ball line, then attach that end to the cleat as well.  If your boat has two cleats - one on either side of the bow - your crew should attach each end of the dockline to a different cleat. 

How much line should be used?

The amount of line to use is situational; maybe ten feet. You can't use a long line in a mooring field and you typically won't attach the floating line directly to the vessel.

If you are alone on your boat, attach one end of the dockline to the blow cleat in advance. Approach the mooring ball at minimum speed with your bow into the wind.  Put the engine in neutral, grab the pickup stick or loop from the side of the boat and walk it up to the bow.  Then attach the mooring ball's line to the cleat or cleats using the dockline described above. 

One thing you never want to do is cleat off to the back of the boat. If the weather turns, and water comes over the transom, it could sink the boat. 

Follow this simple procedure and you will come to appreciate the hassle-free experience of letting the mooring ball do the work of securing your boat to the bottom.  You can simply sit back and enjoy "hanging on the hook" without having to deploy your anchor. 

Posted: Nov 2, 2022



Add Comment | News & Specials